Easyflex 80A

Home / Products / Composites / Flexible rubbers / Easyflex 80A


Overview

Polyurethane Casting Elastomer Shore A80

 EASYFLEX 80A is a liquid pour shore A elastomer.


Features

  • High elongation
  • Dimensionally stable in large temperature ranges
  • Easy mixing ratio


Information

  1. Stir base thoroughly to ensure uniform dispersion of components
  2. Pour within 1 minute to ensure maximum viscosity of mix

    NOTE : Quick Mix - do not mix more than you can use in 2 -3 min
  • Hand pour
Mixing ratio (Parts by weight)
3 : 1
Gel time
3 - 4 min
UTS
20 Mpa min
Elongation at break
390%

Six months from date of manufacture if kept in closed opaque containers at 20 - 25 Deg C.
The B component contains MDI isocyanate do not leave open will result in contamination due to moisture in atmosphere.

If using for concrete moulds , do not use diesel or natural oils such as castor oil. Use Duroplastics 20 for sealing patterns or master before pouring Easyflex